MOC-120H moisture meter moisture meter moisture meter_Bauch metrology Technology (Taicang) Co.，Ltd

◆ The use of a medium wave infrared quartz heater with excellent drying rate for a wide range of samples can achieve the ideal drying state, and its service life is long (20.000~30.000 hours). In the measurement of the balance part of the heart, UniBloc is not easily affected by temperature changes and can be easily measured up to 0.001 g units.

◆ The measurement method can be selected by combining automatic stop and time stop with standard, fast, slow, segmented and other drying methods to select 9 methods. Moreover, each sample is combined with measurement conditions such as temperature monitoring range through measurement methods, and there are a total of 10 measurement modes that can be pre logged in, allowing for immediate setting of suitable measurement modes for the sample.

◆ Equipped with a simulated bar chart that can monitor the range of changes in quality at any time during measurement. It is possible to visually confirm the drying condition, making it easier to estimate the end time. The built-in Shimadzu's unique "direct window" function

The measured values can be easily imported into Excel, etc. After inputting numerical values into Excel, you can use functions such as numerical calculation and drawing to freely process data. Only one RS232C cable is needed for connection, without the need for interface connection, software installation, etc.

◆ Equipped with a unique automatic tare removal function: a unique way to perform automatic zero adjustment and measurement on the balance. Even for long-term measurements, extremely accurate measurements can be made through zero drift correction.

◆ Equipped with deviation correction function for measured values: it can unify the measured results with the data measured using other devices or methods.

◆ Using a large LCD display with backlight for easy operation in dark areas.

二、Technical parameters:

Model (P/N)	MOC-120H
Model (P/N)	(321-63300)
Measurement method	Method for determining the quality of infrared heating drying
Weighing plate size	30mm
Minimum display value of weighing department	0.001g
Range of moisture content measurement	0.01%~100.00%
Minimum moisture content display bit	0.01%
Maximum sample size	120g
Measurement method	Automatic stop, time stop, rapid drying, slow drying, segmented drying, prediction (comparison) measurement
Dry heat source	Medium wavelength infrared quartz heater
Temperature setting range	30~180℃(step distance of 1℃)
Host size and weight	220W×415D×190H(mm)，4.5kg
Working temperature and humidity range	5-40 ℃, below 85% RH
Required power supply	AC100~120/220~240V, maximum 640W
Attachment	Two sample discs, disc holder, windproof device, sample disc clamp, and 20 aluminum sheets

18914080736