- Telephone
- 18914080736
- Two petal small hole measuring instrument
Two petal small hole measuring instrument
A multifunctional aperture measuring instrument can measure the aperture range from Ø 0.47 to 41.3mm. While measuring the aperture, it can also detect the roundness and ellipticity of the hole, especially suitable for small aperture measurements and high-precision aperture measurements in the laboratory. It can be used for manual aperture measurement or automatic aperture measurement
Application scope and characteristics:
-
Standard probes, hard chrome plated: Ø 0.47 – 41.1mm
-
Standard probes, carbide inserted:Ø 1.5 – 41.1 mm
-
Standard probes, ceramic inserted: Ø 3.7 – 41.1 mm
-
Blind bore probes, hard chrome plated: Ø 1.5 – 41.1 mm
-
T-3P: 3 – Point probes: Ø 4.75 – 150.6 mm
-
T-T: probes to measure deeper bores: Ø 2.05 – 9.8 mm
-
T-PA: probes for parallel measurement: Ø 4.7 – 41.1 mm
-
Special shapes on request, respectively measurement of O.D., recesses, etc
-
Zero setting in setting master e. g. according to DIATEST company standard or DIN 2250-C
-
The built-in elastomer provides continuous force measurement, thus eliminating human factors
-
High universality, within the measurement range of a single probe, it can be easily and quickly adjusted to the required size
-
Modular structure, configured with various accessories to meet any measurement needs
-
Measurement range: Ф 0.47- Ф 41.1mm (two-point) Ф 4.75- Ф 150.6mm (three-point)
-
Measurement depth: up to 2000mm or more
-
Repetitive accuracy: ≤ 1 μ M When used in conjunction with the bench, the repeatability accuracy can reach 0.5 μ M
-
Performance error: ≤ 1%
In addition to aperture measurement, the two petal measurement system can also measure geometric shapes/defects such as ellipticity, concentricity, barrel shape, etc.
A variety of accessories meet the needs and range of fixed measurements. You can purchase a two-piece measuring system set in a wooden box, for example, with a measurement range of 3.7 to 9.8 millimeters. The mechanical index resolution of 0.01 0.001 millimeters can be used for display, or the digital minimum maximum value, and the display table can transmit measurement values through DIAWIRELESS.
Provide special shapes and solutions according to customer requirements